You might feel overwhelmed to see the different types of saws that are in use and have been in use for centuries. A saw is a type of instrument which consists of a chain, wire and blades that can be used to cut different materials like stone, wood, and other metals.
When a material is placed in front of the toothed edge of the saw or when the toothed edge of the saw is used on the material you get fine cuts which is necessary for different types of works.
There are many types of saw which can be used by using hands only and there are other types of saws which are powered by electricity, stream, water or gas. Depending on the need and technology available at that time different saws have been in use.
Here in this article we have decided to list the thirty-two most common and popular types of saws that are known throughout the world.
Thirty-two Most Popular Types of Saw
- Back Saw
- Bow Saw
- Coping Saw
- Crosscut Saw
- Fret Saw
- Hacksaw
- Japanese Saw
- Keyhole Saw
- Pole Saw
- Pruning Saw
- Rip Cut Saw
- Veneer Saw
- Wallboard Saw
- Wire Saw
- Band Saw (Stationary)
- Band Saw (Portable)
- Chain Saw
- Chop Saw
- Circular Saw
- Compound Miter Saw
- Flooring Saw
- Jigsaw
- Miter Saw
- Oscillating Saw
- Panel Saw
- Radial Arm Saw
- Reciprocating Saws
- Rotary Saws
- Scroll Saw
- Table Saw
- Tile Saw
- Track Saw
In this section of the article, we will discuss the uses of the above-mentioned saws in detail.
Back Saw
In general, the back saws are in use for the miter cuts. The name of Back saw originated because of the reinforced spine and the short blade it comes with. In different parts of the United States and the world the back saw is also known as tenon saw or miter saw.
The furniture makers and the cabinet makers prefer back saws the most for its precise cuts. Backs saws have wider brace which gives them superior control which results in precise cutting. Although the degree of precision may vary from blades to blades.
The thinner and fine toothed a blade is, the better we can expect to provide precise cuts. At the same time, one enjoys better control because of the wider brace of a back saw.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Advanced and Intermediate
- Best for Cutting: Wood
Advantages
- Cuts miters.
- Super precise fine cuts.
- Super control because of the wider brace.
Disadvantages
- As it has a wide spine the blade cannot go beyond the cuts
Bow Saw
Bow saws look exactly like a bow. It comes with large teeth’s which is best suited to use outdoors. The saw is perfect for using on thick limbs and other thick materials.
As the saw comes with large teeth’s one can easily use it for general pruning, logs and on trees. One caveat about the saw is that one should not expect to get precise cuts for a bow saw as it is not designed for that purpose.
If you are looking for professional cuts in woodwork projects then avoid this one. But great for dealing with thick trees.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Beginner
- Best for Cutting: Pruning trees, logs
Advantages
- Can get bidirectional cuts
- Suitable for the outdoors.
- You can also cut wet wood.
- Makes light work of thicker logs.
Disadvantages
- One purpose tool
- Cannot avail precise cuts
Coping Saw
Coping saw is known for its precision cuts. If you are someone who is in need of very detailed cuts and work then coping saw is the saw for you. The saw is perfect for scroll and trim works.
The blade in the saw is very thin which works as an aid to the precise cuts the makers of the saw claims. The saw body is also arched that means you can easily deal with material which is thick and wide.
The users of the saw enjoy super control of the machines like rotating. It can be done even in very compact spots. The toymakers, furniture makers, and even plumbers endorse coping saws without any hesitations.
One can cut different materials including some metals, plastic, woods and composite materials. Although, the kinds of blade you use has some sort of effects on the materials you are cutting.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: advanced
- Best for Cutting: Composites, Metal, Wood, and Plastics.
Advantages:
- Ideal for scroll and trim work.
- Has Rotating blade.
- Perfect for detail work.
- Precise cuts
Disadvantages
- This is a specialized saw. If you are looking for a generalized saw then avoid this one.
- Suitable for small scale works.
Crosscut Saw
If you like to work outside or your work is based on outside then a crosscut saw is the saw for you. This one is like the bow saws. You can get both directional cuts with this saw as it has wide-teeth.
This saw is the number one choice for the people who cut lumbers. The crosscut saw works fine with big thick lumbers. If you are using the two-handled version of the crosscut saw then you are in luck.
And if you are using the ones that are for a single person, you are also in luck because works like tidying, trimming and pruning can be done easily with a crosscut saw. If you like to camp in the woods then this saw is also ideal.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Intermediate, Beginners
- Best for Cutting: Pruning trees, Logs
Advantages
- Can get cut in both directions.
- Makes light work of trees and branches.
- Comes as a two person saw
- Also comes as a one-person saw.
- Ideal for camping.
Disadvantages
- Useful for outdoor works only
- Cannot get super precise cuts
Fret Saw
The coping saw and the Fret saw comes from the same root and to some extent one resembles the other. If you are someone who likes to work on wider projects then this is the saw for you.
It comes with a deep arched frame. At the same time, you can easily get precise cuts with a fret saw.
One caveat about the saw is that one cannot rotate the blade of the saw and the blade is fixed. Therefore, you cannot get the level of flexibility you get in a coping saw.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Advanced
- Best for Cutting: Composites, Wood, Plastic
Advantages
- Suitable for detail sawing.
- Can easily deal with big width material.
Disadvantages
- The saw is very useful for small scale detailing only.
- Cannot be used for general sawing
- It comes with a fixed blade.
Hacksaw
Hacksaws are widely popular for its ability to give super cuts. It is a very dynamic tool that can cut through different materials easily including pipes, plastics, and woods.
In a standard hacksaw you will see 18-32 teeth's per inch. Which makes this saw very special. The saw is very user friendly which makes it easier for the novice people to get in business.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Beginner
- Best for Cutting: Plastic, Metal, Wood, Composites.
Advantages
- Dynamic.
- The blade has very high tooth count
- Cuts metal plastics and wood
Disadvantages
- Deficiency in finesse.
- Cannot get precise cuts
Japanese Saw
The Japanese saw got its name because of its Japan standard cuts and built up. Historically the people of Japan were praised for their unique products and Japanese saw is one of their super machines.
The saw has a long handle which is also very thin. Because of this this saw can reach different places which is impossible with other saws.
This saw comes in different varieties like Ryoba, Kataba and Dozuki. You can get a great cut with soft and hardwood.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Beginner
- Best for Cutting: Softwood, Hardwood
Advantages
- It’s long handle results in increased reach.
- Super precise cuts
- Varieties of options available
Disadvantages
- Difficult to get beyond Japan
- Not for general purpose use
Keyhole Saw
This is the perfect tool for the people who fit drywall. A keyhole saw has a rounded handle. It also has a long-tapered blade which can be used to make different types of patterns and many minuscule circles.
Therefore, if you are looking forward to shaping some drywall then this is the saw. At the same time, if you need to remove or deal with some pipework then this is also the saw.
When you are working inside sometimes it is very difficult to use power tools. It may be the case that the drywall is very close to the pipework or the cables then this saw can solve that predicament.
When you use a keyhole saw it saves you tons of time in a time like that it also gives you quick solutions.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Intermediate
- Best for Cutting: Composite, Wallboards, Wood, Drywall.
Advantages
- Can make small cuts and holes
- Appropriate for drywall.
- Great for cutting unusual shapes.
Disadvantages
- Useful for detailed work only
- Specialized machine
Pole Saw
Pole saws come handy when you are in need of fixing things near the garden like when you need to prune branches of a tree which is very high. This saw has a long blade which is also expandable.
The reach of which is almost 8 inches. A standard pole saw comes with a reach of 16 feet but if you need even longer reach than this then don’t worry a pole saw with even higher reach is also available.
The gardeners usually endorse this saw blindly because to cut a long branch they don’t need the ladders.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Beginner
- Best for Cutting: Trees, Logs
Advantages
- Super reach.
- Perfect for garden use.
- Can easily cut long branches of trees.
Disadvantages
- Use for outdoor work only
- Cannot get precise cuts.
Pruning Saw
Pruning saws are very popular among the gardeners and landscapers. This saw comes with a curved blade and the size of it varies from 13-15 inches usually.
The saw has a pistol grip which gives the users maximum control and comfort. The teeth of the pruning saw go both ways and cut when you pull and push.
As a result, the cutting process expedites and it can remove more materials. This saw works best when you use it to cut lower branches.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Beginner
- Best for Cutting: Branches, Trees
Advantages
- Can cut both ways.
- Better for small logs and lower branches.
- Perfect for the gardeners.
Disadvantages
- Cannot reach high branches.
- Suitable for the garden use only
- Specialist machine
Rip Cut Saw
The carpenters love rip cut saws. They use this saw for framing and precise cuts. The saw comes in different sizes which gives the users varieties of saws.
The blade of the saw is around five but don’t worry you can get very precise cuts because those are very sharp. The blade is designed to deal with and take away maximum materials.
The rip cuts saws are also called hand saws normally. Because of the design and shape one can easily think this is actually a hand saw.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Intermediate, Beginner
- Best for Cutting: Wood
Advantages
- Super sharp teeth.
- Can remove the utmost amount of material.
- It has a classical design and shape
- Super for cutting frames.
Disadvantages
- Less number of teeth on the blade.
- The saw is very generic
Veneer Saw
This saw is used for precise veneer work. This is a very unique saw which has a rounded handle and a double-edged blade. The handle of the saw is very short meaning it the user will enjoy greater control but would not be able to reach far.
The double-edged blade contains about 13 teeth per inch on each side. A cabinet maker's favorite tool is a veneer saw.
Other than that, high skilled woodcutters prefer this saw for ultimate precision and quality cut. This saw is not for beginners or hobbyists.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Advanced
- Best for Cutting: Veneer
Advantages
- Has 13 teeth per inch.
- Has a double-edged blade.
- Precise veneer cuts.
Disadvantages
- Cannot be used for other uses
- Specialized tool
Wallboard Saw
If you know about a keyhole saw then you can easily identify a wallboard saw. A keyhole saw looks exactly the same as a wallboard saw. But there are few differences.
First and foremost, a keyhole saw has longer blades compared to a wallboard saw. A keyhole saw has more teethes per inch. The general use of a wallboard saw consists of cutting holes in a wallboard.
A wallboard saw is primarily used to dig holes so that a big power tool can be used later. A wallboard saw comes in both double edged and single blade variety.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Drywall, Wallboard
Advantages
- Perfect for creating starter holes.
- It comes in both double edged and single blade variety.
Disadvantages
- Compared to a keyhole saw it is less versatile
- General sawing is not possible
Wire Saw
A wire saw functions somewhat like a bandsaw and is very adaptive to the environments which demands precise cuts. This saw actually looks like a wire. A sturdy wire is attached to both sides of the hoop handle.
This saw easily cut neat blocks and large rocks without much problems as it comes with a strong wire.
Other Specifications:
- Hand or Portable: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Wood, Masonry
Advantages
- Super sturdy wires
- Precise cuts
- It can cut masonry
Disadvantages
- Works only for professional tasks
Band Saw (Stationary)
This is a cabinet type saw which comes with a fine blade and pulleys. If you are looking for precise cuts and want very delicate curves and shapes in your wood or other materials then a stationary band saw is the product for you.
The professional woodworkers recommend this saw without a second thought and the saw is therefore very popular. With a saw like this one can easily cut PVC, pipes and even tubes.
This saw is quite different from the conventional saw because of the positioning of the saw and its work style.
A stationary band saw is very useful for resawing meaning you can slice wood into more pieces which have already been sliced.
Other Specifications:
- Fixed or Power: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Metal, Pipes, Tubing, Wood, Plastic
Advantages
- Can cut different types of materials
- Can get delicate curves and shapes
- Perfect tool for resawing
Disadvantages
- The saw is not portable
- Quite expensive to buy
Band Saw (Portable)
If you need on-site work then a portable band saw is the saw for you. The carpenters and contractors like and endorse this saw without any hesitation.
Although the saw is super helpful and popular it has certain limitations when it comes to a stationary band saw like cutting capacity. But it can work in the same manner like a stationary band saw.
This saw working fine with tubes, pipes and other types of materials that are used by the metalworkers and plumbers.
There are two types of varieties available when it comes to a portable band saw: Horizontal and Vertical.
Other Specifications:
- Portable or Power: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Wood, Tubing, Plastic, Pipes, Metal.
Advantages
- This saw is portable.
- Great for on-site work.
- Cuts tubing, metal, pipes, wood.
- Professional contractors recommended.
Disadvantages
- The saw is limited to cutting smaller materials
Chain Saw
A chainsaw is a pretty powerful power tool. This saw is the forever best friend of homeowners and forestry workers. The saw works by a spinning chain link which is around a jut out arm at speed.
One caveat about the chainsaw is that you cannot expect to have precise cuts as it comes with ripping teeths. If you are living in a wooded area then this is the saw for you.
The saw comes in different varieties like electric and petrol. Petrol saws are the most popular types of chainsaw.
Other Specifications:
- Portable or Power: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Trees, Logs
Advantages
- Can easily rip thick logs
- Super powerful
- Dynamic
Disadvantages
- Very dangerous
- Not for the novice users
- Not for precise cuts
Chop Saw
Chop saws are one of the most popular saws in our list. It is also known as a cut off saw, concrete saw, and abrasive saw. The saw has a toothless spinning disc which is mounted on a supporting arm.
If you consider the circular saw genre then a chop saw will come first because of its length. You can easily cut masonry, metal with a cop saw.
Although it somewhat depends on the types of chop saw you are using. If you are using a masonry chop saw then there is no need to think about dust as it comes with a waterline connection.
Other Specifications:
- Portable or Power: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Wood, Metal, Masonry
Advantages
- Cuts masonry and metals.
- Has waterline connection to reduce dust.
- Interchangeable blades.
Disadvantages
- Blades are expensive to change
- Not perfect for general sawing
Circular Saw
A circular saw comes with a spinning toothed blade and is smaller compared to a chop saw. Circular saws are the most popular types of power saw.
A circular saw can easily cut masonry, plastic, metal, woods and numerous types of materials without any problem. Some enthusiasts call this type of saw a buzz saw also. A circular saw comes in different varieties also like a compact and mini version.
Other Specifications:
- Portable, Power: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Wood, Masonry, Plastic, Metal
Advantages
- Portable
- Lightweight
- Very efficient
- Blades are interchangeable
- Can cut several types of materials
Disadvantages
- Can get straight cut only
- Suitable for one types of cut
Compound Miter Saw
This saw is a very dynamic and versatile machine. You can get different types of complex cuts like miter, straight, compound and bevel cuts.
If you are someone who works with door frames, windows, crown moldings, trims or scroll work then this is the saw for you. As this saw has super flexibility carpenters endorse it and use it without much thought.
A compound saw can be used outside and ideal for working on site. This saw can also be seen as a permanent settlement in a woodshop.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Advanced
- Best for Cutting: Wood, Composites, Plastic
Advantages
- Dynamic.
- Perfect for door frames, moldings, and scroll.
- Portable.
- The saw can be mounted on a stand.
Disadvantages
- Works great for the smaller materials only
- Rip-cuts is not possible
Flooring Saw
This is a very special type of saw and is used for a particular job: flooring. This saw has been designed for cutting hardwood and engineered flooring.
This saw can be taken outside and work there as an outside saw. The floorings saws can easily replace miter saw or the jigsaw. This saw is perfect for the trade professionals.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Wooden flooring, Engineered
Advantages
- Ideal for engineered flooring and hardwood.
- Floorboards can be resawed .
- Portable.
Disadvantages
- The saw is only fit for one task.
- There are other tools that are more dynamic and can do the same Job.
Jigsaw
This saw is particularly designed for getting intricate non straight lines and curve cuts. When the machine is on a thin narrow blade goes up and down.
This saw is perfect for the novice users but the functionality is extremely versatile. It comes with both cordless and corded versions.
This Jigsaw is compact. Most of the professionals and DIYers endorse a jigsaw without any hesitations.
Other Specifications:
- Portable or Power: Both
- Difficulty Level: Intermediate, Beginner
- Best for Cutting: Wood, Composite, Plastic
Advantages
- Simple to use.
- Super for cutting curves and unusual angles.
- Mobile.
- Dynamic.
Disadvantages
- Cutting straight lines is difficult.
- Makes rough cuts.
Miter Saw
This saw is well known for getting excellent bevel and miter cuts. It sits on a tabletop. The saw is also portable. In order to get a desired angled cut, the saw has a circular blade which is mounted on a moving arm.
If you are looking for a saw that can come handy for window frames, doors, picture frames, crown moldings then this is the saw for you. The general idea is that if you need accurate angled cuts, then miter saw is the saw!
There are some similarities between a miter saw and a chop saw but you should not mismatch between the two as a chop saw can give you straight cuts and a miter saw can rotate cuts.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Composite, Plastic, wood
Advantages
- Portable.
- It makes miter and bevel cuts
- It cuts base moldings, frames, and crown.
Disadvantages
- There is limitation on the size of the material.
Oscillating Saw
An oscillating saw is very popular and known for the multiple attachments that fit in one base.
The handle of the saw is thick and short and therefore it looks like a grinder. The saw is very adaptive as the blades are changeable depending on the work at hand.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Beginner
- Best for Cutting: Wood, Plastic, Drywall, Wallboard, Masonry.
Advantages
- Has interchangeable blades.
- Adaptable.
- Good for beginners.
Disadvantages
- The saw is hard to control
- Circular saw is more accurate
- Miter saw is more neat
Panel Saw
A panel saw is a sister of a table saw. It comes in several varieties like horizontal and vertical. It also works in many ways like one can maneuver the wood towards the blade or slide feed.
The saw is perfect for cutting sheet panels and larger stocks. The sign makers and the cabinet makers' endorsement panel saw happily!
Other Specifications:
- Portable, Power, Fixed: All
- Difficulty Level: Intermediate, Beginner
- Best for Cutting: Wood, Plastic, Composites, Sheet materials
Advantages
- Suitable for cutting more significant material.
- Can cut sheet panels
- Suitable for sign makers and cabinet makers
- Easy to use
Disadvantages
- One directional saw.
- The saw cannot make angular cuts.
Radial Arm Saw
If you are familiar with chop saw or miter saws then you are in luck because a radial arm saw looks somewhat like them.
But there are many differences like the blade and motor of the radial arm saw is suspended from an arm which extends out over the material’s surface you are dealing with. Because of the arm of the saw you can enjoy a better cutting surface.
The saw can easily give compound cuts, cut miters and so on. One of the benefits of a radial arm saw is that the blades of the saw are interchangeable.
Although, it somewhat depends on the materials you are using.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Wood, Plastic, Composites
Advantages
- Greater control of the saw.
- More angle and position choices.
- The saw extends over the workpiece and can be maneuvered
Disadvantages
- Dangerous to use.
- The blade of the saw has a tendency to “crawl” towards the user.
- A miter saw has more accuracy.
Reciprocating Saws
Some calls the reciprocating saw the agile and aggressive cousin of jigsaws. The action of the blade is the same as down and up motion. This saw is held freehand while a jigsaw has a flat base. With a reciprocating saw you can get rough or small cuts.
The saw is also very powerful. It can cut through nails, metals and wood. With reciprocating saw one can easily deal with wood joints and flooring.
It is quite popular among construction workers and window fitters. Even this is used by the emergency service people in rescue missions.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Intermediate, Beginner
- Best for Cutting: Wood, Wallboards, Metal, Drywall
Advantages
- Rich blades.
- Can cut through metals.
- Maneuverable.
- Changeable speed of the blade
Disadvantages
- Suitable for heavy duty use
- The accuracy is compromised.
Rotary Saws
The mechanized version of a keyhole saw is a rotary saw. If you want to make a small opening in a panel or drywall then this is the saw for you.
This saw is widely popular among different types of people. It is especially popular among the construction workers, electricians and plumbers.
The motion of the blade is the same as the reciprocating saw it goes down and up. The rotary saw has numerous uses. It can be used to deal with wood, plastic, pipes and tubing.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Intermediate, Beginner
- Best for Cutting: Wood, Wallboards, Drywall
Advantages
- Useful at cutting small openings.
- Dynamic
- Can cut wood, plastic, pipes
Disadvantages
- The saw has only some specific uses
Scroll Saw
A scroll saw can be described as the stationary version of a jigsaw. The wood is fed towards the blade. Although both a jigsaw and a scroll saw work pretty much the same way but if you want superior level accuracy the scroll saw is the answer.
If you work decorative finish then a scroll saw is also the answer. The saw is very appreciated in the expert community for its ability to give detailed cuts.
Other Specifications:
- Power, Portable, Fixed: All
- Difficulty Level: Advanced, Intermediate.
- Best for Cutting: Plastic, Wood
Advantages
- Super for intricate cuts
- Can do its job precisely.
- Comparatively safe to use.
- Great for woodwork hobbyists.
Disadvantages
- Expert uses
- Works best for smaller works
- Suitable for specific uses.
Table Saw
A table saw is a unique type of saw that has a slot in the middle which is occupied by a circular saw (technically). To be more clear it's like a saw mounted on a table.
The saw is capable of making rip cuts. At the same time, the saw is capable of dealing with large pieces of materials. It is also capable of making angled cuts.
The hobbyists, cabinet makers and wood makers all love this saw for its ability to take loads and work efficiently.
Other Specifications:
- Power, Fixed, Portable: All
- Difficulty Level: Intermediate, Beginner
- Best for Cutting: Wood, Plastic, Composites, Metal, Sheet materials
Advantages
- Known as the workhorse of the woodshop.
- Very versatile.
- Can cut angles.
- Can make rip-cuts.
Disadvantages
- Not very accurate compared to other types of saw
Tile Saw
This particular tile saw is a specialized tile saw. It is the same as other miter saws or table saws. A tile saw usually has a diamond coated blade means you can expect great results.
At the same time, it has water cooling systems in order to keep the blade and tile from getting overheated.
This saw is super powerful. It can cut ceramics and porcelain like cheesecakes. You can also cut glasses if you have the right blades.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Advanced
- Best for Cutting: Ceramics, Tiles
Advantages
- Has cooling system
- Can deal with most ceramics
- Can cut angles
- Precise cuts
Disadvantages
- It requires mastery to use the saw
- Good for particular uses.
Track Saw
This saw is like a circular saw that mounts on a system in order to perform straight and long cuts. The users of the saw have the ability to remove or add pieces from the tack systems.
Although it solely depends on the size of your desired cuts. A circular saw has a more protruding blade compared to a track saw.
Other Specifications:
- Power or Portable: Both
- Difficulty Level: Advanced, Intermediate
- Best for Cutting: Wood, Composites, Plastic
Advantages
- Cuts extended straight lines.
- Extremely accurate.
- Great for rip-cuts.
- Portable.
Disadvantages
- Difficult to use in a confined space
- You need a flat surface.
Last Few Words:
Finally, if you are new in the woodworking business then take your time before making an impulsive purchase. Feel free to consult your expert friends. Always look for reviews. But I believe the most important thing you can do is self-analysis of your need and demand.
If you know what you want and what you need out of the machine, it is highly likely that you would make a great purchase.
The most common type of saw is the rip cut saw. You can do multiple things with it. At the same time, be aware that there are some power tools which can be lent. And, if you need a particular saw for one time use only then borrowing is the best solution.
And, if you are a regular user of particular types of saw then purchase a good quality saw that will last long.
Good Luck!
There is noticeably a bundle to know about this. I assume you made certain nice points in features also. Pablo Szerbin